Add Voltage Reading to App

Emporia Energy Community › Product Ideas › Add Voltage Reading to App

Viewing 5 reply threads
  • Author
    Posts
    • October 21, 2020 at 6:38 pm #6489 Report Abuse
      ralphjjr
      Member

      It would be nice to see Voltage in the App, or at least be able to export it.

      It’s a nice way to track abnormalities.

    • October 21, 2020 at 7:02 pm #6490 Report Abuse
      jh26
      Member

      Can the clamp-on sensors even measure voltage?

    • October 21, 2020 at 7:10 pm #6491 Report Abuse
      ralphjjr
      Member

      They cannot – but voltage is being measured through the wiring harness. My understanding is that on the Gen 2 this measurement is even more precise.

      The values are used for other calculations. I think if they are being used for math, they could be displayed also.

    • October 30, 2020 at 1:49 pm #6504 Report Abuse
      impl22
      Member

      Yes this is big need. You must be measuring voltage through harness, if not you will be approximately calculating KW and this isn’t the case. Should be an easy add. Together with knowing the main values.

    • November 10, 2020 at 12:51 pm #6527 Report Abuse
      farcouet
      Member

      Hello,

      Please also add this feature! Voltage per phase display as it’s already monitored (at least on my gen2).

      Thanks!

      Fred

    • November 11, 2020 at 5:44 pm #6533 Report Abuse
      Marty @Emporia
      Emporia Staff

      Hello Everyone!

      Breaking out phase detail is a feature is on our roadmap, but right now we don’t have a specific release date. We appreciate everyone’s feedback and hope you all understand that we’re working very hard to prioritize the many enhancements that have been requested.

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.