Adding CT clamp on my Solar inverter, but not wanting to be grid tied caculated

Emporia Energy Community Support Center Hardware and Installation Adding CT clamp on my Solar inverter, but not wanting to be grid tied caculated

Viewing 2 reply threads
  • Author
    Posts
    • #8856 Report Abuse
      fasavard
      Member

      Hi,
      I got a solar setup with multiple inverter.
      I got a 1kw grid tie inverter, hook with emporia. I get proper calculation for my net metering. So far so good.

      I got a second inverter, not grid tied. I only charge my car with it. I would like to monitor how much solar energie i put into the car, but i dont want it the be calculated in my grid tie setup, since it is a completly different setup.

      Is their any way to do this ?

       

      Thanks in advance 🙂

    • #8857 Report Abuse
      fclauson
      Member

      Does you car not tell you ?

    • #8877 Report Abuse
      Emporia Support
      Emporia Staff

      @fasavard if you want you can put a emporia monitor on the inverter feed and measure it that way.  If you would like to keep it separate from the existing configuration you can get a second Emporia unit just for the off grid production.

Viewing 2 reply threads
  • You must be logged in to reply to this topic.