Adding CTs or merging circuits with the Vue Gen 3

Emporia Energy Community Support Center Hardware and Installation Adding CTs or merging circuits with the Vue Gen 3

Viewing 0 reply threads
  • Author
    Posts
    • #10966 Report Abuse
      dsokolov
      Member

      Hello, I have a Vue Gen 3.

      I am getting a generator installed with an additional breaker + interlock in our single panel.

       

      We will need an additional 2 200A CTs and a way to wire these in series or parallel to monitor total load for either power source.

      We don’t need to see the difference in the app.

       

      We also need 2 more 50A CTs and we are okay if the circuits are merged to represent a single circuit, but we still need a way to wire these together on the hardware side.

       

      What is the best way to do this?

      Does simply purchasing another Vue 3 make the most sense?

      If so, would it be possible to merge both systems in the app so we can monitor total load and all circuits as a single system?

       

      This is important so that we don’t overload our generator and we know what devices are influencing our load during emergencies.

       

      Thanks,

      Darien

Viewing 0 reply threads
  • You must be logged in to reply to this topic.