Always On lock needed

Viewing 4 reply threads
  • Author
    Posts
    • #8623 Report Abuse
      Thanamite
      Member

      When running something critical like a fridge or a Server, the plug must never enter an off state even if someone by accident hits the switch button. Can you add such an ability to lock the plug in the on state?

      • This topic was modified 2 years, 4 months ago by Thanamite.
    • #8625 Report Abuse
      djwakelee
      Member

      Totally agree this is needed.  Some people have even physically opened up the units and modified them make them always on, since there have been many glitches with the software operation – turning off loads after brief power outages.

    • #8626 Report Abuse
      Thanamite
      Member

      Looks harder than I thought. I opened up the back of one but it is not enough. I will have to also remove the board from the input plug to see how I can bypass the relay.

    • #8627 Report Abuse
      djwakelee
      Member

      There is a write up on the forum with photos.  Just hard to search for it.  I will try and find it.

      Found it…

      Hacking the SmartPlug to be always ON.

      • This reply was modified 2 years, 4 months ago by djwakelee.
    • #8629 Report Abuse
      Thanamite
      Member

      Thank you very much. So we just need a jumper that can be soldered from the top. Nice.

Viewing 4 reply threads
  • You must be logged in to reply to this topic.