Amp text display seems truncated down instead of being rounded

Emporia Energy Community Support Center Emporia App Amp text display seems truncated down instead of being rounded

Viewing 4 reply threads
  • Author
    Posts
    • #7102 Report Abuse
      douellet
      Member

      Hello, I’ve seen a discrepancy (or annoyance) in the way the application show current values in text. I have a EV charger set to deliver 16 amps at 240V to my car. With some meter in parallel, I see that my EV charger effectively draws 15.7A (close enough to 16A), but the App will show 15A in text value, while it should have been rounded to 16A or (or show the decimal part). Still, the graph below plots correctly my current at almost 16A. It seems you forgot to round the values before printing the text.

    • #7111 Report Abuse
      scrambler
      Member

      Actually amps are displayed with 2 decimals on small value, so there should not be any rounding on the displayed value at all

    • #7115 Report Abuse
      douellet
      Member

      No more decimals shown on values above or equal to 10 Amps (going grom 9.99A to 10A, not 10.0A). We loose 1 good significant digit and the second digit is still wrong in the case of 15A displayed for a load of 15.7A.

    • #7119 Report Abuse
      scrambler
      Member

      That should be considered a Bug and fixed in the future. We should keep both decimals

    • #7147 Report Abuse
      Emporia Support
      Emporia Staff

      Hello @douellet, I have sent this to the development team for review.   We should add a decimal to provide more accurate numbers.   Thanks for your feedback!

       

Viewing 4 reply threads
  • You must be logged in to reply to this topic.