App view for comparison of circuits

[sperlingj]

I have 8 circuits being monitored. I would like an app view that clearly shows what percent of my total usage is coming from each of the circuits.

[Marty @Emporia]

Hello and thank you for your feedback on our expansion module display. I have forwarded your recommendation to our development team for review.

[Nimbus]

Me too. I have 4 devices that show whole house energy draw, better then this. I bought this to monitor individual circuits.

[Jim @Emporia]

@sperlingj and @Nimbus, we’re hard at work on a new home page in the app that will allow you to see the usage and percentage of usage for each of the expansion circuits. We’ll keep you posted. Thanks for you suggestions!

[j30sailor]

Jim, in your update will you be able to see the mains at the same time. That would be great.

[Jim @Emporia]

Yes @j30sailor, you’ll be able to see the mains as well as all monitored circuits in both actual usage and as a percentage of the mains. We’re also in the early stages of R&D on adding smart outlets to the mix. These will also factor into this view, but that’s hush hush for now 🤫.

[emilya]

This is an exciting feature to look forward to!

Since I assume that view won’t be able to offer the same granularity as the individual circuit graphs due to space constraints, if I may make a related suggestion, it would be great to be able to switch between the granular circuit views directly, without having to go into the list of monitors and select a new one and go back to the chart. Something like being able to tap on the monitor name above the chart and see a drop-down of the other ones to select, or maybe being able to swipe the whole screen left or right to scroll through all the available monitors.

[Author]

Posts