Emporia v2 wifi issues.

Viewing 3 reply threads
  • Author
    Posts
    • #7259 Report Abuse
      lhatton
      Member

      I’v installed the device and had a little issue with the connection to my wifi 2.4 only WPA2-PSK.
      It would connect to an open network.  After a reboot of all the devices involved, I was eventually able to get it to connect to the wifi-WPA2.

      Now several months later, I needed to rework my network and put my IOT devices on there own VLAN.

      I can not at this time get the emporia to connect to any WPA2 secured network.  Again it works fine with an open network.
      I had bought a second emporia for my shop, and still had it new in box, so I tried it with the same results.  I tried another router same on both.

      There’s a problem with these devices that needs addressed.

       

      Les

    • #7261 Report Abuse
      lhatton
      Member

      Followup…

      Another poster mentioned similar issues.  Multiple rapid attempts eventually got it to connect.
      I tried the same and on attempt six it connected.
      There seems to be an issue with the timeout on the handshake.

      Les

    • #7262 Report Abuse
      scrambler
      Member

      Someone also just mentioned that the App must be given the Bluetooth access.

    • #7263 Report Abuse
      Emporia Support
      Emporia Staff

      Hello @Ihatton we will definitely look into this and thanks for the documented steps you took to finally get your devices connected.

      Should you discover any other issues or problems please let us know.

      Emporia

      Gary

Viewing 3 reply threads
  • The topic ‘Emporia v2 wifi issues.’ is closed to new replies.