Extension/expansion cable for Gen 2

Emporia Energy Community Support Center Hardware and Installation Extension/expansion cable for Gen 2

Viewing 7 reply threads
  • Author
    Posts
    • #7054 Report Abuse
      kkl
      Member

      Can 2.5 mm mini plug extension or expansion cables be used with Gen 2 VUE sensors?

    • #7081 Report Abuse
      waterboyz
      Member

      I seem to remember that someone did use extenders. They posted what they used in here somewhere.  I’ll try to look.

    • #7086 Report Abuse
      Emporia Support
      Emporia Staff

      hello @kkl yes the sensors can be extended with common audio cables, the 50A sensors are 2.5 mm and the 200A sensors are 3.5 mm.   We don’t recommend extending beyond 30ft.

      -Jim

    • #8050 Report Abuse
      ken
      Member

      Does it matter if the 3.5mm extension cables are mono or stereo?

    • #8132 Report Abuse
      Mark
      Member

      You’ll want mono with only two contacts on the male side.

    • #8292 Report Abuse
      TSK
      Member

      Please post a link for these cable extensions if available. Everything I’ve found on Amazon are either 2.5mm male to 3.5mm female or they are 3 or 4-pole plugs (not the mono as recommended by @mark).

    • #8317 Report Abuse
      Alan_B
      Member

      See here on Amazon.com, or here on Amazon.co.uk

    • #8318 Report Abuse
      Alan_B
      Member

      The above are the 3.5mm extensions. See here on Amazon.com, or here (£17.76? OUCH!) on Amazon.co.uk for the 2.5mm extensions.

Viewing 7 reply threads
  • You must be logged in to reply to this topic.