Frequency alert & date/time filter on graphs

Emporia Energy Community Product Ideas Frequency alert & date/time filter on graphs

Viewing 1 reply thread
  • Author
    Posts
    • #6520 Report Abuse
      rhorine
      Member

      I have 2 suggestions for product improvement.

      1.  I’d like to see a notification based upon frequency of use.   For example, I have a livestock water pump circuit that I monitor.  Occasionally,  the water valve assembly gets stuck slightly open resulting in a slow tank overflow and the pump kicks on every few minutes.   For this situation an alert based upon the pump kicking on more than 20 times within an hour,  would get this noticed.   Of course the frequency number and the length of time would want to be user settable values.

      2. I’d like to see a filter on the graph page to select a date&time range for the graph.   When looking at the graph by minutes and you need to go back in time a day or two,  it takes a lot of scrolling.

    • #6550 Report Abuse
      Marty @Emporia
      Emporia Staff

      @rhorine Thanks for the Feedback!   The notification based upon frequency of use is a wonderful recommendation and I will certainly pass that along.   The selection of specific date and time range on the graphing is already on the roadmap!   Hopefully that will be released early 1st quarter of 2021.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.