Shouldn’t be too involved to monitor this system. Main thing to be aware of is that the Gen 2 can only monitor AC lines (no direct current), so will need to be on the AC side of your solar inverter. The other important part is that you’ll want to make sure your 200A CT’s are installed above the line-tapped solar into your mains in the main panel. One other thing to note, is that if you’re trying to monitor any circuits physically distant from the Gen 2 device (more than 20 feet), then you’d probably need another Gen 2 in that location since extending sensors has that 20′ limitation.
Once you’re setup and running, feel free to reach out to Customer Support to double check that things are setup correctly and monitoring your usage accurately.