I have my Vue setup for Solar NetMetering, but also want to see what the panels are generating. I connected two 50A Circuit Sensors to the two wires leading from the solar inverter into the main box, and labeled them SolarBlack and SolarRed, based on the color wire I clamped. I also set them for -1 so that they’d read as generating.
When looking at my consumption, it does not appear to properly subtract the energy generated by the solar from the Main, as shown in the attached image. As you can see, the Balance (43.515) is just a total of all values, not the Main minus the Solar. Shouldn’t the Balance be 15.965 – 33.758 = -17.793 (or a total net generated of 17.793)?
How do I set this up so that the balance will properly show that the energy put into the system via the solar?