What is the data length and time resolution of readings in the app?

Emporia Energy Community Support Center Emporia App What is the data length and time resolution of readings in the app?

Viewing 2 reply threads
  • Author
    Posts
    • #6592 Report Abuse
      Ric Werme
      Member

      I noticed a couple days ago that my per second data was more like per 5 second data.  Looking at things a bit more closely over a couple days, it looks like I have per second data for about the most recent 20 minutes or so and 5 second data for the previous 3 hours, and nothing before that.

      Is the 5 second data a recent change?  I haven’t had time to look at things very closely for several months.

      How much data is available on the app for all time periods?

    • #6650 Report Abuse
      Marty @Emporia
      Emporia Staff

      @ric Werme please see the data retention below.   The change you noticed is we are now only storing every 5th second when the device is not active.   Once the App is opened you can see 1 second resolution.   The Vue can store about ~15 min of data you will see the 1 second history when you open the app.

      1 second data is retained for 3 hours*
      1 min data is retained for 30 days
      1 hour / 1 day / 1 week / 1 month / 1 year data has unlimited retention.
      If you’d like an export of your 1 min and 1 hour data, just go to Settings > Export Raw Data to CSV and choose the device you’d like to download the data for.

      The system will send you an email with a link to download your data.

      *When App is open, otherwise will be 5 seconds.

    • #9658 Report Abuse
      Jaco in MN
      Member

      I recently installed two Vue 2 monitors, one with 8 CTs, and one with 16 CTs.

      After extensive testing, I can say that the above information is no longer accurate.  Testing was with firmware versions 334 and 356.

      When the device is not active, i.e. when the app is not open and monitoring second data, the device sends data no more than once every 15 seconds (not every 5 seconds as stated above).  And very often, data is only sent every 30, 45 or 60 seconds.

      When waking up the device, i.e. when opening the app, it will send second data for the last 15 minutes, but only if there are 8 or fewer CTs connected.  With 9 to 16 CTs connected, it will only send second data for the last 2 to 3 minutes.  I wish I knew if this was a bug or a feature.

Viewing 2 reply threads
  • You must be logged in to reply to this topic.