Wire Management

Emporia Energy Community › Support Center › Hardware and Installation › Wire Management

Viewing 4 reply threads
  • Author
    Posts
    • December 26, 2020 at 1:07 pm #6656 Report Abuse
      OhmsLaw
      Member

      Is it fine to tidy up the 16 sensor wires + two main sensors inside of plastic split loom tubing or spiral wrap? I didnt know if there was any capacitance introduced by having multiple wires tightly space next to each other.  Thanks!

    • January 11, 2021 at 5:54 am #6676 Report Abuse
      currentdraw
      Member

      I have interference on one sensor since it registers even when the breaker is flipped.

      Installation is very packed. I will be interested in ideas how to fix that.

    • February 6, 2021 at 3:59 am #6820 Report Abuse
      waterboyz
      Member

      CurrentDraw said:

      ” I will be interested in ideas how to fix that.”

      Me too.

    • February 6, 2021 at 1:16 pm #6828 Report Abuse
      playfair
      Member

      Wrapping is a good idea! As long as the sensor wires don’t wind around each other (sort of forming their own CV), there should be no cross talk between them.  This is my panel before closing up, I have no erroneous noise.

    • February 6, 2021 at 6:58 pm #6835 Report Abuse
      waterboyz
      Member

      Playfair

      You have such a tiny panel.  Mine has 40 positions and they can have twin breakers per slot so that can push the number of circuits to nearly 80.

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.