Emporia Community

Community Forum for Emporia

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: EU 3 phase installation setup #10236 Report Abuse
    Dirk Grote
    Member

    Hello, even switching on a powerful consumer, sauna with 9 kw on 3 phase does not bring any success. The reactive power of the induction hob is still displayed as 70 VA. I have now added a PV system and when setting up the solar settings (reset WIFI/solar setup) I get the following error messages. This means that the PV inverter is not correctly integrated.

    First message

    Three phase system only mapped to 2 unique voltage channels
    A maps to black
    B maps to black
    C maps to red

    Second message

    Duplicate Channels Detected

    You have two (or more) wire harness less connected to the same Voltage line, Move a wire harness lead up or down vertically adjacent (stacked) breaker and try again.

    in reply to: EU 3 phase installation setup #9981 Report Abuse
    Dirk Grote
    Member

    Hello, I have the same problem with the reactive power. My induction stove draws 90 W when it is switched off. This cannot be right and of course distorts the power consumption throughout the day.

Viewing 2 posts - 1 through 2 (of 2 total)