Curious what analysis you are running. I’ve been trying to figure out how I could go about pulling the data for a couple of my expansion module channels Heat & A/C(need both since I have a heat pump system) aggregate and pull down local temperature data from something like OpenWeatherMap.org and plot the heating/cooling power usage relative to outside temp and what I know to be my inside temp(Plotting the differential essentially). Then I could compare what kind of effect changing the temperature setpoint of the thermostat gives me. Or what my before and after looks like on Insulating and air sealing rooms in my house(to see if I’m earning that money back). I’ve never messed with pulling down data through API’s. Hopefully one of these days I can get the free time and can learn how.
