[mfifield01]

I’ve been using the method from charrettepa above for 8 months. It seems to work great. You combine both circuits into one clamp, just loop one wire so it runs backwards through clamp.

[mfifield01]

Thanks for the suggestion of crossing the wires. I just did this for my dryer and everything seems to be reading correctly (~5.8kW).

[mfifield01]

I just installed mine today and had 5% balance (not as bad as above). I read on here that you need to have at least 3kW load when you setup everything in the app. I went to Manage Devices, Home Power and Circuits, and clicked on the Reset WiFi / Solar Setup. Then I started the oven to simulate a large load and went through the WiFi setup. Everything seems good now. I do have a balance of about 3-7watts, but I am not monitoring the 15a circuit breaker for the Vue device.

[Author]

Posts