Just in terms of product suggestion, I really don’t care for the way 220V split-phase loads are handled. I want to be able to see imbalance between the lines, and most 220V loads have some single-phase component within. For my hot tub, you can use all of that information to ascertain its state – what pumps are on, is the heater on/off and at what level, is the small recirc pump working. For this, using 2 channels on the Vue 2 works fine, but I also would like to be able to have those values combined in the app. I don’t really want to just do a 2x multiplier on one of them … the software should be smart enough to by default show me a combined load, and allow me to click down to see the individual phase currents if I so desire.