Transfer Switch and Two Gen 2 Vue’s

Emporia Energy Community › Support Center › Hardware and Installation › Transfer Switch and Two Gen 2 Vue’s

Viewing 1 reply thread
  • Author
    Posts
    • June 22, 2021 at 10:12 pm #7660 Report Abuse
      Imburr
      Member

      I have my main line that comes into my main service panel. In this panel, I have a gen 2 Vue, with 16 circuits connected.

      One of the circuits in this panel is a 100 amp double breaker, which then feeds into my generator transfer switch.

      I have a second Vue in the transfer switch, with 12 circuits connected. The two 200A CT are hung on the incoming feed for the transfer switch, which is coming from the 100 amp breaker.

      In Emporia app, I nested the second Vue under the first one.

      Is this the correct way to set this up?

    • June 24, 2021 at 10:09 pm #7664 Report Abuse
      Kevin @ Emporia
      Emporia Staff

      Hey @imburr,

      That sounds correct to me. Feel free to reach out to the Emporia support team directly if you have additional questions.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.