I’m Eric and just bought a Vue to use at my Church. It’s an old building (1930) and has 2 pairs of really thick wire coming in from the street and unfortunately the CT coils don’t fit around them. The wire is super stiff (and live) so I can’t pry them apart to put the coil around just 1. Is there a way to put a larger coil on it? I’m an electronics engineer so I can solder and compare the specs to get a coil with similar specs. I’m not all that concerned about absolute accuracy as 40% of our bill is due to the Demand Charges so we’re looking to find the source of the peak for the month and shave that down.
We’re in NH.
Thanks,