[razzfazz]

Yes, I was able to attach the spring clamps to one wire from each phase, and with the 2x multiplier on the mains, I’ve been getting sensible numbers.

[razzfazz]

Unfortunately, if you look at the diagram in my original post, you’ll see that the wires alternate between the phases (i.e., A-B-A-B); tho given the size and spacing, I don’t think two of them would have fit through a 200A sensors anyway. In fact, the included 200A sensors are just a tad too wide to fit around even a single mains wire. Spring clamp ones are in the mail; hopefully those will do the trick.

• This reply was modified 3 years, 5 months ago by razzfazz.

[Author]

Posts