Emporia Community

Community Forum for Emporia

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 5, 2021 at 10:09 pm in reply to: Amp measurement for 220v circuits #7095 Report Abuse
    jbyrkit
    Member

    stumbled onto this today, wondering where half my power was going unmonitored, since i have sensors over the things i think were hogging all the power. I ended up putting two sensors on the same circuit. “pool panel” and “blower 1” are on the same wire.  “pool panel” has a multiplier of 2, and “blower 1” has a multiplier of 1. You can see the amps page is a mess.

    PS. It’s been a year based on the dates in this thread. Seems like it isn’t going to get fixed.

    https://community.emporiaenergy.com/wp-content/uploads/hm_bbpui/7095/sab26ktituykauorejw81en4rioyyl3e.png

    February 11, 2021 at 4:01 pm in reply to: aggregate by circuit type #6896 Report Abuse
    jbyrkit
    Member

    help me out: if you use 2 sensors for a 220 circuit, how do you spot a problem? unbalanced load?

    February 9, 2021 at 8:50 pm in reply to: Tiered Rates that adjust with time #6872 Report Abuse
    jbyrkit
    Member

    +1 for different rates. Duke Energy charges a different rate for the first 1000 kwh.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)