Emporia Community

Community Forum for Emporia

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Allow cloudless local instance #8260 Report Abuse
    farcouet
    Member

    yes I have seen it also after. But still a bit less interesting than being just able to forward directly in the configuration to MQTT or influx. And if I go the route to flash it then I will probably just change the configuration manually and configure MQTT as it’s already supported. Seems to be not that bad to do: https://flaviutamas.com/2021/reversing-emporia-vue-2

    in reply to: Allow cloudless local instance #8258 Report Abuse
    farcouet
    Member

    Any update on this? Really looking for this feature since I bought 3 of those… If there’s a prototype to configure a MQTT broker to send the data why not make this available to all as a unsupported feature?

    in reply to: Web-based app #6528 Report Abuse
    farcouet
    Member

    Hello,

    Web app will also be a great feature. Specially to export CSV.

    Thanks!

    Fred

    in reply to: Add Voltage Reading to App #6527 Report Abuse
    farcouet
    Member

    Hello,

    Please also add this feature! Voltage per phase display as it’s already monitored (at least on my gen2).

    Thanks!

    Fred

    farcouet
    Member

    Hello,

    I have also been requesting this since day 1 and I was very disappointed that this was not already available.

    Please add this feature you already have possibility to log both phases. The display is essential also when running on power generator (which is my case when there’s a power outage) and I specially bought this to do that (I have before older CT coil hooked to a ugly LED display). I wanted to be able to monitor phase balancing from my desk when there’s an outage.

    Product is perfect just missing this 😉

    Fred

Viewing 5 posts - 1 through 5 (of 5 total)