[waterboyz]

I just noticed that the timestamp of my post #6965 is waaaay off.  I looked in my profile and did not find a Time Zone to establish my location.

[waterboyz]

UPDATE

My 4th Smart Plug is working now….after I let it gather its’ thoughts for the last 6 hours.

• This reply was modified 3 years, 9 months ago by waterboyz.

[waterboyz]

jj613

Well said.  Thank you.

[waterboyz]

Just spent an hour adding another Smart Plug.  Finally got the app to see it and it is listed as an input.  The tiny blue light is solid.  When I select to turn on or off the Smart Plug via the app, it thinks it is but the Smart Plug does nothing.  Randomly the Smart Plug will flash red for a second then go back to solid blue.  I’ve unplugged the Smart Plug and plugged it back in multiple times and closed and reloaded the app multiple time.  And yes, went the hotspot method as well.

The frustration level is high.  This technology has been used for a number of years with immediate success.  Why must it be so difficult here?

I will admit that, finally, my other 3 Smart Plugs seem to be working just fine after a few days.

[waterboyz]

I have used BlueStacks with full success.  I’m old and have phat phingers so using my full-size desktop is wonderful.  Never knew it existed until it was mentioned here.

[waterboyz]

Marty,

Thank you for the reply.

My censor comment was because I was frustrated when I posted a couple of comments and they disappeared with no reason why.  I think I eventually figured it out after trial and error.  But deleting a comment without an explanation is not cool.

If this forum was hosted and managed by another entity other than Emporia I could understand why there could be attention issues but this has your name all over it.  I do understand the limited resources and thank you for the renewed emphasis on this forum.

[waterboyz]

Jim said:  Hi @smithsrsn this is on the development teams list of improvements.  We are working to get this out in the next couple of months.

Yes ! !

[waterboyz]

This has been mentioned a few times.  Maybe in the next app update?

Some people just advocate to use one CT and use the multiplier.  I’m still in the data recording phase so I will see what the legs are and maybe use some numbers for the multiplier based on my trending data.  Currently, I have A/C-1 = 172.841 and A/C-2=171.642.  So, A/C-2 x 2.007 would be approximately the same as the two added together.  I have not tested, yet, how many positions there are to the right of the decimal.

I’m OCD so I will probably wait until the app gives me the separate and combined numbers.

 

[waterboyz]

I thought I read in here somewhere that the one-second interval is not really a “one-second” interval but some kind of average over 5 seconds.  But then again, it could be some residual leftover.  I’m no specialist in this area of life.  You have great graphing skills by the way.

[waterboyz]

My IT stuff is on a battery backup system.  Sometimes the utility power goes out and I still have Internet.  I’m pretty sure that if the utility and Internet went out that the Emporia stuff would be useless because it is cloud-based.  Would it still work if you have cell/data service through your phone?  Yeah, I’m probably not thinking clearly here.

[waterboyz]

tBlakely said:  “… I had an airline cable (steel cable) attached to the top of the pump to be able to pull it up, and over about 2 years the effluent dissolved the cable! …”

You may want to get checked out by a doctor HAHA

I did a quickee lookee around and found these sensors that may help.  You could attach them to a PVC pipe so the wires would be inside the pipe.  Plugging off the pipe just below the lowest sensor and drill holes in the lower section and let the pipe rest on the bottom of the tank.

ebay.com/itm/2PCS-Stainless-Steel-Float-Switch-Liquid-Switch-Water-Level-Silver-Sensor/371742932541?_trkparms=aid%3D1110012%26algo%3DSPLICE.SOIPOST%26ao%3D1%26asc%3D231103%26meid%3D5d01908633d640c4a9c177f31c475fa1%26pid%3D101196%26rk%3D3%26rkt%3D12%26mehot%3Dnone%26sd%3D142485546396%26itm%3D371742932541%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DPromotedSellersOtherItemsV2WithMLRv3&_trksid=p2047675.c101196.m2219

ebay.com/itm/2PCS-75mm-Stainless-Steel-Float-Switch-Tank-Liquid-Water-Level-Sensor-110V-220V/142485546396?epid=2203386081&hash=item212ccce59c:g:J0QAAOSw7cxZntvZ

ebay.com/itm/Liquid-Water-Level-Sensor-Horizontal-Float-Switch-52mm-PP/174560970818?hash=item28a4a50842:g:TSsAAOSwuUJf6kdV

[waterboyz]

OK, that link without using the “link” button worked.

Here is the other link.

reliancecontrols.com/ProductDetail.aspx?MB75

[waterboyz]

OK

My last last last reply stuck.  So I made another one after that and it had a link in it.  That one went poof so I will try another way.

reliancecontrols.com/ProductDetail.aspx?THP108

[waterboyz]

jj613 said:  @waterboyz why do you think that?  Nobody from Emporia seems to pay attention at all to these forums, I’d be surprised if they are censoring.   What did you do?  Insult my mother?    Recommend a competitive product?

I didn’t make any comments about your mother so I’m not sure what rule I broke.  20 minutes ago I made a reply to you and it also disappeared with no notice or explanation.  Poof.  What is odd is the opening screen for this community shows that I was the last to make a reply to this thread but it is not actually here.

[waterboyz]

Looks like I am being censored.

[Author]

Posts